Please turn the switch to the "ON" (O) position every time the mouse is electrified. Then remove the high pressure box and clean it off. Don't reinstall the box until it is fully dried. (Clear off the odor that the mouse leaves with the detergent, otherwise no mouse will enter into it anymore.)
There are 3 metal sheets in the high pressure box. High pressure will be generated if the mouse contacts two internal metal sheets. At the same time, the external metal sheets will generate the high pressure automatically. Therefore, please don't touch the metal sheets when the high pressure is produced so as to prevent the electric shock.
If the red light flashes once every other 2 seconds after the electronic mouse trap boots and electrifies the mouse, it means the batteries are required to replace otherwise this would affect the repelling function. Please turn off the switch when you replace the batteries.
Please turn off the voltage switch and remove the batteries if you don't need to use it for a long time in case the leaking liquid damages the electronic mouse trap.
When a mouse goes into the cage and triggers the two metal sheets inside, the electronic mouse trap can immediately generate high pressure, make the red light flash for 2 minutes, stop producing high pressure, let the green light flash once every other 5 seconds, and then no longer produce the high pressure. The high pressure can't be regenerated until you turn off the machine and reopen the power switch.
