Hunter Irrigation Water Meter for Hydrawis Wi-Fi Programmer. Male Thread 3/4". with a Sound Transmitter Every Litre. DN 20 mm. Water Meter That Indicates Water Consumption.
Works only with Hunter Hydrawise programmers.With a transmitter of sound all litres.Male thread 3/4". DN 20 mm
The water meter consists of 2 parts: 1. Body: The body of the water meter contains an analog selector for manual measurement. 3 cables depart from the body of the meter. The cables must connect to the sensor inputs on the programmer to take distance measurements. In other similar models, only 2 cables are used.
2. Adapter: Each flow meter is equipped with an adapter that allows you to connect your watering system. Planning is an important step to properly install the Hunter flow meter and get reliable operation of your watering system.1. Flow meter input location: flow sensors install between the water current and the main valve.
2. Cable: You will need two wires. The gauge of the flow meter cable will be determined by the total length of the cable between the timer and the flow meter. For cables over 30 m long, use a covered cable.
Configuration: Complete your meter configuration. 1. Connect to your account.2. Creates a flow sensor: It is important that you correctly select the flow meter when you set it on the Hydrawise app. If you choose the wrong model, this may cause false measurements.3. Assign zones to the flow sensor.
