8x replacement special threads for the Sauerländer plaster brush type I and type II. The special threads are made from an extremely wear-resistant plastic. With its 5 edged shape, they can absorb any type of weeds. The threads have a cross-section of 4.4 mm and are therefore able to meet any challenge.
The special threads are made from a hard, flexible plastic. The five-edged neon yellow threads with a diameter of 4.4 mm already find their application area in weed control. The threads are very wear-resistant and pull into the joints during use. Some contact pressure should be exerted, resulting in good traction.
The threads are 25 cm long and are guided twice through the hole holes as shown in the photo. This gives you a stable and wide work surface. A fully occupied brush with 8 threads cleans an area of approx. 15 - 20 m², depending on the degree of pollution.
The worn threads can be easily pulled out of the body with a long nose pliers. When threading the new threads, make sure that one end of the thread is threaded into the offset circle. In addition, the thread must be drawn evenly, then the usable length of 12.5 cm can be achieved effectively.
Box contents: 8x special threads suitable for plaster brushes type I and type II.
